Unit 14

Look at the video clip for holding material in a chuck
Look at the 3 and 4 jaw chucks and explain why we use the two types.

Milling

Look at a video on Milling  in You tube and then give safety examples from the video

P1 Unit 2

Look at and develop answers to the P1 section of the unit . Read the given information and this will provide all the answers you need in the questions. You do not need to find any outside sources.

Deadline for the Unit 17 work is three weeks before the end of term. Thhis gives me time to mark it and get it back to you for corrections and improvements.   IE 24th June .Anyone late or not finished will be comming back at lunch and afterschools to finish it off. YOu have been warned!

Brake drum change

Watch the following video and use it to create a set of instructions for someone to change the rear drum brakes on a car.
http://www.youtube.com/watch?v=tuCerdkXyBI
or
http://www.youtube.com/watch?v=aaJ6X-uxMGM
You need this for unit 207 LO2

Project Marking

I will be marking the projects over 1/2 term
I need you to check that I have the most up to date copy of your work and that it is in my postbox AND is printed off before the hols
Failure to do so will delay the mark of your project.

Also you need to be working on Unit 207 and developing answers to Lol 1 and 1.2

Deadlines

Can I remind you that Unit 2 needs to be completed for initial marking by the end of this month. Those of you who are behind and are in danger of not meeting this date need to spend lunchtimes in the workshops catching up to ensure completion of the work.

Diploma Work

You should all have finished your project but any student who has not should spend time completing this.


Unit on Maintenance. This needs detailed work on LOL 1 looking t the maintenance of the machine you have selected. \\\\\\\\\\suggest service items and the consequences of failure to maintain.

Here is the copy if it is not on your work at home

EG207 LO1.1

MB1 _____ marks awarded out of 4 available

Machines and equipment must be well maintained in order to be safe to use. This applies to workshop machines, vehicles and aircraft.  In general the more hazards the machine presents to the user, the stricter the maintenance must be. Maintenance types include breakdown, frontline, planned and corrective, although this list can be added to.

Describe the machine or equipment you will be working on (include any serial numbers or unique markings as appropriate);

…………………………………………………………………………………………………………………….....

…………………………………………………………………………………………………………………….....

…………………………………………………………………………………………………………………….....

…………………………………………………………………………………………………………………….....

…………………………………………………………………………………………………………………….....

…………………………………………………………………………………………………………………….....

…………………………………………………………………………………………………………………….....

Describe two different types of maintenance that are performed on this item (4 marks)

a)     ……………………………………………………………………………………………………………………

…………………………………………………………………………………………………………………….....

…………………………………………………………………………………………………………………….....

b)       ………………………………………………………………………………………………………………….…………………………………………………………………………………………………………………….....

…………………………………………………………………………………………………………………….....

LO1.1 MB2 ______ marks awarded out of 3 available

Giving examples, explain how each type of maintenance is appropriate (3 marks)

a)     ……………………………………………………………………………………………………………………

…………………………………………………………………………………………………………………….....

…………………………………………………………………………………………………………………….....

b)       ………………………………………………………………………………………………………………….…………………………………………………………………………………………………………………….....

…………………………………………………………………………………………………………………….....

LO1.1 MB3 _____ marks awarded out of 3 available

Describe the advantages and limitations for each type of maintenance (3 marks)

Maintenance type	Advantages	Limitations
a)…………………………...
b)……………………………

Snow Work BTEC

Dear all
Due to snow please look at the folowing.

We are just starting to look at Unit 17
This is a machining unit and looks at LATHES AND MILLING machines.

I need you to produce a risk assessment for each . You need to find a you tube video on how to use the machines

Suggest the following

http://www.youtube.com/watch?v=gviinFxo694


and for the milling machine This is a series of 5 videos so watch all 5 !

http://www.youtube.com/watch?v=J1VtofzVG24

Unit 14

Please ensure you have downloaded the new unit we are starting ASAP  We need to make the best use of lesson time and I would like to finish Unit 2 and 17 as soon as we can. That way I can get it marked and back to you with any corrections as required